Water & Rain Water Indicator

How much rain you are collecting? How much water are you Saving? ...The LiquiLevel ST range of tank level indicators designed for use with all above ground Rainwater tanks up to 10 metres in height.

Tank level Indicator for water tanks
  • No electricity or battery required.
  • Indicates accurately the true level, unlike other gauges that read back to front.
  • The option of guide wire system to keep the level indicator plumb and prevent from swaying in strong winds.
  • Stainless Steel, polypropylene construction.
  • Easy to install with installation instructions and template provided.
  • No need to drain existing tank to install.
  • No side wall connections required.

 

Operation of the LiquiLevel is by means of a float ball which moves up and down on top of the liquid inside the tank. The float is connected by a Polyester cord which runs through a simple pulley and counterweight system. The chemical resistant counterweight inside the tank ensures the Level indicator always stays the same level as the liquid stored within the tank, thus showing the true liquid level. 

Tank Level gauge for water tanks

The liquiLevel ST tank level indicator is installed at the top of the tank, using a tank fixing kit supplied with each unit. This system is available in 2 sizes for tanks upto 10 metres tall. The image above shows the tank level indicator installed onto a bunded tank. For this type of installation, we use a longer pulley bracket called the ST XL system which is 670mm long allowing for the bund area. The standard length of the pulley bracket 370mm long.

The external tank level indicator accurately stays the same height as the float ball inside the tank, giving a reliable and easy tank level reading. Other gauges work 'back to front' or in Reverse, but the LiquiLevel uses a counterweight which is connected to both the external level indicator and the float ball.

For Technical Specification, Click Here

Tank Level Indicator for rainwater tanks

The LiquiLevel ST system is available with or without the guide wire system. The kit is easily and quickly installed and is designed to keep the external indicator plumb and prevent it from swaying in the wind, always indicating an accurate level reading. The Kit inludes Guide wire for tanks upto 5m/10m with M6 threaded connection for fixing to pulley bracket, M8 ground anchor and Gripple wire fastener.

The LiquiLevel ST System is available in 2 different lengths. The Pulley housing on the LiquiLevel ST system is 370mm long for standard tanks, but tanks with a bund or a projecting top/cover the LiquiLevel STXL is recommended. The length of the STXL is 670mm.

LiquiLevel STXL System 670mm long.

We offer a solution for storage tanks without a top/cover. The LiquiLevel AB bracket fixes to the base of the ST pulley bracket. The AB bracket is then fastened on to the tank side wall as shown below.

LiquiLevel ST AB Bracket

LiquiLevel ST AB system installed to corrugated steel water tank

LiquiLevel ST AB System tank level indicator

Steel water tanks are commonly used for bulk water storage for a wide variety of applications. By using the standard LiquiLevel ST tank level indicator system and the AB bracket, you can now accurately monitor your storage tank at a glance. The Level indicator has a reflective band for easy reading upto 100 metres away.

We manufacturer this Level Indicator in Sweden to a very high standard. The unit is supplied in a mail order carton with full installation and user instructions, inluding installation template. 

This product is designed for bulk rainwater storage tanks over 2500 litre. We manufacture this product using chemical resistant materials which means it can be used for a wide variety of applications.

For Technical Specification, Click Here.

Please contact us today for Distributor pricing, or if you have any questions, please call us.

1 product