Septic Tank Level indicator

The LiquiLevel device is designed for versatile liquid level measurement across various tank shapes, including barrels, cisterns, cube-shaped tanks, cylinders, and spheres. It effectively measures levels in rainwater, drinking water, septic tanks, heating oil, and other liquids. Results can be displayed in liters [l], percent [%], or centimeters [cm], with the default output in centimeters. To take a measurement, simply press the button briefly. Powered by a 9V industrial battery, the device alerts you with a "bat" message when the voltage drops to 7V, ensuring reliable operation. Experience precision and convenience in liquid level monitoring with LiquiLevel

Programming – hold the button for 4 seconds.

1. Select the type of tank by briefly pressing:
   0 – result in cm (factory setting)
   1 – cube, e.g. single or accumulator tank
   2 – lying cylinder, e.g. underground tank in the garden
   3 – ball
   A long press saves the selection and goes to the next step.
2. Selection of the height of the tank in cm (not for “ball” type).
   The three digit display “000” will appear and the LED “cm” will be lit.
   A short press increases the value of the flashing position.
   A long press saves the value and moves to the next step.
   Example: for a value of 250cm: 250 #> 250 #> 250 #
3. Volume selection in liters (for accumulator tanks, use the total volume of all tanks).

A three-digit display with a dot “0.00” appears and the LED [l.] lights up.
A short press increases the value of the flashing position.
A long press saves the value and moves to the next position.

Example: for a value  250cm: 250# > 250# > 250#
Example: for a value 1250cm: 125# > 125# > 125#

Then we move on to programming the comma thousandths (the dot -.- – is blinking).
A short press moves the comma or deactivates it.
Confirm your selection by holding and exit, as in the example below.
Example: for the value 250: 2 5 0 # (comma disabled)
Example: for a value of 1250: 1.2 5 # (the first LED is on)

4. End of programming. The first measurement is performed.

Technical data